I'm going to write about how to repair a flat on the deck.
Your out driving with your car and suddenly bang you hear and the car is bumping.
You turn into the side of the road and you go out side and of course you got a flat!
But don't worry I'm now going to tell you how to fix this the easiest way.
First of all you should make sure you have the handbrake tightened and the shift in gear to make sure the vehicle doesn't move. Preferably you have parked on a level spot with firm ground.
Then when standing out there you should go back to your trunk to check if you have the following:
* A jack
* Screw driver
* Spare tire
* Socket wrench.
Having all these things will make things easy!
Now if you have a car with hubcaps you should take the screwdriver and try to flip out the hub cup from the tire, after that you see the wheel bolts.
Now take the socket wrench and turn it counter clockwise to loosen the bolts, but remember before you can unscrew them completely you have to lift the car up of course.
Then you have to use the jack and if you go down and check under the car you should find a special spot for the jack called jack point.
When you've put the jack on the right spot you shouldn't have any family in the car because then it can go very bad and you should not have your engine on either.
Now you need to use the jack to elevate the car and how that's done you can read in the owner's manual or have me explain it some other time.
With the car in the air...