Essays Tagged: "Industrial Goods and Services"

Design For Manufacture (DFM) Water Tank Cooler For The Middel East

it?Refrigerant - liquid that evaporates inside the water cooler to create the cold temperaturesMany industrial installations use pure ammonia as the refrigerant. Pure ammonia evaporates at -27 degrees ...

(5 pages) 60 0 4.1 Mar/2002

Subjects: Science Essays > Engineering > Mechanical Engineering

Compaq Corporation, The intention of this project is to demonstrate the function of production planning in a non- artificial environment

received an understanding of how how much planning goes into even the most simplest of manufactured goods. Production managers must employ at least one type of forecasting method in order to avoid the ...

(8 pages) 217 0 4.8 Feb/1996

Subjects: Businesss Research Papers

Mass Customization.

ign tools that allow customers to create their own customized productswhether they are manufactured goods or services. For example, Nike allows customersto customize sneakers on-line for a nominal cos ...

(7 pages) 183 0 5.0 Jun/2003

Subjects: Businesss Research Papers

Operation Management - Process choice and Layout planning

PROCESS CHOICECharacteristics of project, jobbing, batch, flow, and process production systems, with examples for each.Project, jobbing, batch, flow and process pro ... on are the process types used in manufacturing. The figure below shows the trade off between volume and variety of outputs. In choosing one of these systems, high volume means low variety and high var ... ect processes - The essence of project processes is that they are all different, so very low volume and very high variety. The identification of activities and their relationship are uncertain, they c ...

(4 pages) 273 1 4.4 Mar/2004

Subjects: Businesss Research Papers > Management

Corrosion in Heat Exchangers

r selecting materials used for heat exchangers are corrosion resistance, strength, heat conduction, and cost. Corrosion resistance is frequently a difficult criterion to meet. Damage to heat exchanger ... ables related to specifying heat exchangers -- for example, temperatures, flow rates, pressure drop and heat transfer -- that are common to all types. There also are some variables that are specific t ...

(1 pages) 38 1 3.8 Apr/2004

Subjects: Science Essays > Engineering > Mechanical Engineering

During this dissertation the technical characteristics of a radial flow pump were examined....

ial flow pump were examined. Using the laboratory facilities of the university, the pump was tested and the characteristic curves were determined.The influence of the rotational speed and the angle of ... n casing vanes were also examined.In addition the hydraulic losses of the pump were also calculated and the theoretical characteristic curve was derived.The final part of this project consisted of a m ...

(19 pages) 65 0 5.0 May/2004

Subjects: Science Essays > Engineering > Mechanical Engineering

Commerical LAW: Case on the dispute between an supplier of chemical product and the user who was injured during the process of these chemical product.

terms have been breached. However there is arguably an exemption clause in this contract, but only Goods Act 1958 (Vic) can be used here.a. Which ActIn this case, although it's not stated how much th ... nal domestic or household uses. TPA does not apply where the buyer is not a consumer. Therefore the Goods Act applies.b. Which terms have been breachedOf the terms implied under the VGA, the implied b ...

(7 pages) 95 0 3.0 May/2004

Subjects: Law & Government Essays > Law > Cases

Analysis of the lawyer scene in Albert Camus's novel 'The stranger'

The section deals with the colonel's visit to the lawyer. The colonel wishes to discuss his case and the fifteen year long wait for its resolution.The lawyer is a monumental black man. Firstly he i ... an. Firstly he is presented as poor and this is visible throughout the text. He works in a barnyard and everything surrounding him is of wood. He uses a pianola as a desk and the whole room is made ou ...

(2 pages) 15 0 0.0 May/2004

Subjects: Literature Research Papers

Experiment to investigate the heat released during a displacement reaction

be varied from 0% to 100%. I therefore feel it would be sensible to measure 0%, 20%, 40%, 60%, 80%, and 100% concentration. The 0% would be the control: if anything changes with this concentration, so ... be room temperature.This experiment will need to be reliable in order to be certain of the results and conclusions. To do this, the experiment should be repeated, in order to try and avoid anomalies. ...

(5 pages) 60 3 2.8 Oct/2004

Subjects: Science Essays > Chemistry

Destin Brass Products Co. case

ated costs calculated using the activity-based costing method is very different from the existing standard unit costs and the revised unit costs. Exhibit 3 uses the traditional cost allocation system, ... traditional cost allocation system, which allocates all costs based on measures of volume. In the standard unit costs, Destin Brass uses direct labor as the only cost driver, which rarely meets the ca ...

(3 pages) 291 0 3.0 Mar/2005

Subjects: Businesss Research Papers > Accounting

Materials and Automotive Bumper Industry

mper?A bumper is a shield made of steel, aluminium, rubber, or plastic that is mounted on the front and rear of a passenger car. When a low speed collision occurs, the bumper system absorbs the shock ... rbs the shock to prevent or reduce damage to the car. Some bumpers use energy absorbers or brackets and others are made with a foam cushioning material.http://www.nhtsa.dot.gov/cars/problems/studies/B ...

(4 pages) 32 0 5.0 Jun/2005

Subjects: Science Essays > Engineering > Mechanical Engineering

Automotive Materials

Q2:From the flow chart and tables in part1 we simply understand that too many products entering to the system and require t ... entering to the system and require the same machines which there are not enough machines available and this is a practical.Q3:There are some wastes in the system. To improve the system we have to do ... dering the manufacturing of product A, B I found out there is a delay in the Jig bore for product A and it has to wait for product B to finish the process for 0.85 hourAnd after that there is another ...

(2 pages) 28 0 3.0 Jun/2005

Subjects: Science Essays > Engineering > Mechanical Engineering

Avis Walton

Avis Walton is used to being told where to go and what to do once he gets there. As a "picker" for 99 Cents Only Stores, Walton spends his 5 a.m.- ... oken instructions. "Go to row 12, section 8, bin 31," an authoritative woman's voice in his ear commands, and Walton zips to row 12. Blip-blip. He scans the bin tag with a wireless handheld computer t ... sweat, 24-year-old Walton lifts two cases of vinyl tablecloths onto a pallet, rips open a third box and removes four more tablecloths. "Confirm pick," he says into his microphone, thus prompting the v ...

(1 pages) 12 0 0.0 Feb/2006

Subjects: Businesss Research Papers > Case Studies

Engineering Ethics

the engineer. This is the case in the safety of hoses manufactured by the XYZ Hose Company.It is standard practice among farmers to use the chemical anhydrous ammonia to fertilize their fields. This ... l anhydrous ammonia to fertilize their fields. This is a chemical that reacts violently with water, and therefore must be handled very carefully. This chemical is stored in mobile pressurized tanks th ...

(3 pages) 25 0 0.0 Apr/2001

Subjects: History Term Papers > North American History

Contribution Margin Income Statement

come statements:Harry Huffnpuff GlassblowingTraditional Income StatementRevenue$136,000Less cost of goods sold$136,000Gross Profit 0Marketing $6,050Net Income (Loss) ($6,050)Harry Huffnpuff Glassblowi ...

(2 pages) 98 0 2.0 Jul/2007

Subjects: Businesss Research Papers > Accounting

Machining Technology         While machining has gradually changed over the many

irst changes was to convert all of the machines to operate on electricity such as the engine lathes and the milling machines. For many years they were all driven by steam power or water. This made it ... iver or a source of water. The next change was to make it all easier to process parts faster and cheaper . This led to the invention of the CNC machines which allows one person to produce hundr ...

(1 pages) 394 0 0.0 Feb/2008

Subjects: Science Essays > Chemistry

Machining Technology         While machining has gradually changed over the many

irst changes was to convert all of the machines to operate on electricity such as the engine lathes and the milling machines. For many years they were all driven by steam power or water. This made it ... iver or a source of water. The next change was to make it all easier to process parts faster and cheaper . This led to the invention of the CNC machines which allows one person to produce hundr ...

(1 pages) 440 0 0.0 Feb/2008

Subjects: Science Essays > Chemistry

Impact of IT on Automobile Sector

Conclusion9References11INTRODUCTION"Third Wave" organizations, as per Alwin Toffler, are those post-industrialization organizations that bank on technology, digitization and continuous innovation. The ...

(10 pages) 58 0 0.0 Aug/2008

Subjects: Area & Country Studies Essays

General Appliances

and transmission and stamping division) and six staff offices (finance, engineering, manufacturing, industrial relations, purchasing and marketing staff). The staff offices do not have functional auth ...

(4 pages) 41 0 0.0 Oct/2008

Subjects: Businesss Research Papers > Case Studies

Chromatography Lab

ance (may be gravitational or vacuum) Procedure: Collect materials Clamp the flask in the ring stand Add Buckner funnel to the top of the flask Place piece of filter paper (with pores small enoug ... res small enough that only the liquid passes through) in the funnel so that lays flat in the funnel and covers the entire area Connect side-arm flask to vacuum and vacuum to create a low pressure sys ...

(1 pages) 2 0 0.0 Nov/2013

Subjects: Science Essays > Chemistry